This is the radio controlled, electric powered, Almost-Ready-to-Fly,
  Great Planes ElectriFly E-Performance Series YAK 54 3D Park Flyer Airplane.
           For Intermediate Modeler/Fliers at least 14 years of age.

FEATURES: Construction: Laser cut balsa and plywood Wings: Factory covered, built-up wood with oversized ailerons Tail section: Factory covered, built-up wood construction with over- sized control surfaces Covering: Factory applied lightweight film Cowl: Fiberglass construction, factory painted to match covering Battery and Motor Compartment: Magnetic latches elimimate screw fasteners for cleaner appearance and better aerodynamics Aileron Control: Landing Gear: Formed aluminum, factory painted in white Wheel Pants: Vacuum formed plastic, factory painted in red Wheels: Lightweight 1.75" (45mm) diameter foam wheels Spinner: 1.75" (45mm) diameter, red plastic construction Hardware: Molded from composite materials for precise response and weight savings Building Time: Ready to fly in only 4-6 hours. Warranty: Great Planes Model Manufacturing Company guarantees this kit free from defects in both materials and workmanship at the date of purchase.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,

REQUIRES: Motor: Brushless, RimFire 35-30-950 Out-Runner OR Ammo 24-33-4040 In-Runner Gear Drive: 24mm, 4.5:1 ratio  not required for out-runner Propeller: 11x4.5 Slo-Flyer electric propeller -  Electronic Speed Control: 25A for Brushless motors -  Battery: 3-cell 1250-2100mAh LiPo -  Battery Charger: LiPo compatible - Radio: 4-channel with micro receiver -  Servos: Four micro size - (FUMT0414) Servo Extensions: Two 6" (152mm) Slim Wire and One Dual Servo Extension Misc. Items: building and field equipment

SPECS: Wingspan: 41" (1040mm) Wing Area: 356 sq in (23 sq dm) Weight: 24-27oz (680-765g) Wing Loading: 9.7-10.9 oz/sq ft (30-33.26 g/sq dm) Length: 38" (960mm) Airfoil: Fully-Symmetrical Center of Gravity: 3-1/8" (79mm) Back from the wing's leading edge Control Throws- High Rate Low Rate 3D Rate Elevator: Up & Down 1-1/8" (28mm) 5/8" (16mm) 2" (51mm) Rudder: Right to Left 2-1/2" (64mm) 1-1/4" (32mm) 3-1/2" (89mm) Ailerons: Up & Down 7/8" (22mm) 1/2" (13mm) 1-1/2" (38mm)