- Battery Input Voltage: 2S lipo
- BEC: 6V/2.5A
- 1/27 motor Limit: 10000kv or below
- Max Ampere draw: ~30A per phase
- Size: ~22.5x13.5x9mm(not include the plug)
- Weight: ~5g(without any wire installed)
Mini-Z Motor limit with 2cell x 3.7V LiPo. The motor timing is at 0 deg. 10000kv or below
* Ultra-smooth, Precise Throttle and Braking Control
* Compatible with Sensored / Sensorless Brushless Motors
* Data Analysis Capability (RPM, Low voltage and ESC temperature)
* Built-in one-touch On/Off switch with LED
* Built-in Low voltage cut-off, Overheat protection and signal loss protection
Upgraded features from Anima V3 ESC (800520):
. Change to 32-bit MCU with ultra-smooth, faster response with precise throttle and braking control. More top end power with the same item function setup.
. Support ~2.5A BEC ampere drawn which is raised up by ~60%.
. Support ~30A instant ampere drawn by the motor which is raised up by ~50%.
. All wire are exposed to open area for easy soldering.
. Built-in Bluetooth device for advanced programming and firmware update through the Mobile APPS.
. APPS will be available on both IOS and Android.
. Real Time Data Analysis through Mobile APPS(Current Input & Output Throttle, Temperature, RPM, Adv. Timing, Voltage and min. voltage, Max Temperature, RPM & Adv. Timing).
1 x Anima 30A ESC
1 x Motor Sensor Wire for #500822 PN Motor Anima35 Anima 55 Anima75
1 x Wire Connector ESC to Receiver #500823
1 x Wire adapter (Futaba)
1 x JST Female plug for 2S Lipo Battery
Instruction Manual Download