MA010 AWD A-Arm Front Suspension Instructions
Parts Number MA0150 Download Instruction Link
?Unequal length A-arm suspension for MA010 chassis.
?VModeled after full scale performance car suspension for realism.
?VDouble A-arm suspension gives good control of suspension geometry during travel. Induce camber changes during cornering.
?V Camber change keeps wheels near vertical for maximum tire contact with road. Allows for precise cornering and maximum road holding.
?Direct suspension swap
?VFront end width remains the same
?VLow profile suspension will work with low bodies like Ferrari Enzo that does not currently work in the AWD chassis without cutting.
?VRide height remains the same as stock
?Suspension movement use ball joints and pivot pins instead of sliding knuckle. Eliminates stiction associated with sliding pin especially with high offset wheels.
?VLow stiction results in consistent cornering.
?Rigid ball joints instead of snap fit. Joints will not pop out even during hard collision.
?No bump steer.
?Use current MR02 or MA010 spring.
?Adjustable camber from 0-1.3?X degrees with additional 1.3?X/mm of camber gain.
?Adjustable caster from 0-2.3?X degrees
?4 position adjustable upper A-arm pivot
?VChanges camber gain, static camber and roll center
?VQuick adjustment with set screw
?Quick down stop adjustment with turn of a nut
?Benefits of the sophisticated suspension system are precise cornering and maximum road holding which adds to mini-z driving pleasure