PN Racing Mini-Z V2 PNWC Ball Bearing Motor 50 Turn

Replaced the stock Mini-z Buggy motor with this 50T Ball Bearing motor, what an improvement! Change your gearing to accomodate and this will give a huge boost in top speed and keep the wheels spinning for some easy drifting on smooth surfaces. The motor gets warm under the stock body, nothing major but I've cut a small air gap to keep it cool. Thanks!

This is a BIG step up from a stock mini z motor! Use in big open spaces, as you run out of room pretty quickly!

Alot of drag break great motor

This worked stock on the MB-010 2019 version, which has beefier FETs (4046 or similar with a 30A peak current rating). Seriously improved performance such that I almost don't feel the need to floor the motor (almost ;)) on a basketball court. However, it takes about 1-2 hours of running time to loosen the stiff brushes and wake the motor up. Before that, it'll be very high resistance and self-brake.

I did not realize that this motor says it does not work with sport model. Well I have been using it for the last week with great results. I did break it in before installing though. I am running 4.8 second laps on Mini 96 with this motor.