PN Racing Mini-Z AAA Charging Tray with Balance Plug

Awesome batteries! Speed Monster with great time. I used these in my Kyosho Mini Z MB010 Inferno buggy. I had to upgraded the motor to a Kyosho MZ504 VE Brushless Motor (needed to upgrade the ESC aswell the Kyosho MB023B Brushless ESC Unit 2.0). The stock servo side was fine and needs not to be replaced. Need to solder the two power supply wires from the new brushless ESC to the chassis battery terminals (easy just remove the old esc black and red wires). Very Important need a KT-19 radio or above. The KT-18 Radio will not work. Also only can use two of the AAA 555mah Lion batteries along with two AAA placeholder dummy batteries. You can use a upscale charger as long as you get the PN Racing Mini-Z AAA Charging Tray with Balance Plug Part#: 500757 from Kenon Hobby. Im using a Hi Tec x4 AC charger with the balance tray. Choose Lipo and then v.type Li-Io 3.6 (Li-ion) balance mode, choose Li-Ion Balance 4s 14.4 to charge all PN RAcing 4 555MAH batteries (most these chargers are the same). This is the same review instructions (UPDATED) from the PN 555mah batteries. I had to update the correct charge settings for the charger.

Great charging tray for AAA battery, only complaint it does not charge the batteries individually... if you have one battery with a uneven voltage it will not charge/discharge properly

Works great I just ordered 4mm bannana connectors an wired it in to use on my venom charger